2006 Left Header - 24096 Bytes
2005 Right Header - 4175 Bytes
LOGIN Join WTCA |  Contact Us |  Site Map |  Questions?

Menu didn't load. Click here or refresh to view.


Best Viewed with
Get Internet Explorer 5
800x600 resolution

SPECIAL THANKS TO BCMC 2011 EXHIBITORS

Did you know all of the proceeds received from BCMC go back into our industry? We want to take this opportunity to thank BCMC Exhibitors for their significant support and sponsorship of structural building components industry programs. Without their continued support we would not have made such great achievements.

CURRENT STATISTICS

EXHIBITOR INFORMATION

Filter the list below by a product or service:

Select to jump to an exhibitor:

To request information from our exhibitors prior to the show: Check the box next to each exhibitor that you would like information from, indicate specific requests (if applicable), complete the form at the bottom of the page and submit the form. We will forward your requests on to the exhibitors.

Please before using this form to submit requests for information. By doing so you will avoid the need to enter your contact information at the bottom of this page.

AbitibiBowater — 100 sq.ft. — Booth #418

AbitibiBowater is one of the leading North American lumber producers with a capacity exceeding 2.0 billion board feet. From 2 x 3 to 2 x 10 and #2 and better grade to high MSR grades and premium grades, we have what you need. Come and see us!

Contact: Mr. Claude Lamothe • 514-394-3738 • 514-394-2266 fax • Send Claude a messagewww.abitibibowater.com

Products & Services (2): Lumber MillMSR Lumber Producer

Please send me information on:




Alpine Systems Corporation - ITW Building Components Group (Sharing space with ITW Building Components Group) — 0 sq.ft. — Booth #619

Trike Sponsor

Alpine Systems (a division of ITW Group) is a full service supplier of metal connector plates and Cullen truss hangers to wood truss manufacturers across Canada. Alpine's full line of products and services includes complete engineering service; proprietary software, support and training; and a complete line of cutting, assembly and material handling equipment for truss and wall panel manufacturers.

Contact: Mr. Edmond Lim • 905-417-2766 • 905-879-0703 fax • Send Ed a messagewww.alpinesys.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




AmeriCAD - ITW Building Components Group (Sharing space with ITW Building Components Group) — 0 sq.ft. — Booth #619

Trike Sponsor

VisionREZ by Ameri-CAD bridges the gap between architectural and manufacturing with purpose-built residential Building Information Model (BIM) data. Powered by Autodesk Technology, VisionREZ enables the user via our Instinct process to efficiently create coordinated 3D models, construction documents, framing, graphics, bill of materials with an intelligent model link to ITW BCG software solutions.

Contact: Mr. Jay Moore • 972-747-7880 x219 • 972-747-7180 fax • Send Jay a messagewww.visionrez.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Apex Machine Works LLC — 100 sq.ft. — Booth #201

New Exhibitor 

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with feeding saws manually. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Miser, Alpine's ALS and other linear saws.

Contact: Mr. Steve Weinschenk • 507-250-2909 • 507-322-3700 fax • Send Steve a messagewww.apexmachineworks.com

Products & Services (1): Equipment Manufacturer (Truss)

Please send me information on:




Automatic Stamping, LLC (Sharing space with Keymark) — 0 sq.ft. — Booth #605

Automatic Stamping, LLC is a manufacturer of metal truss plates. Come visit our booth to see the new "AS-20" truss plate and the new "AS-18-HS" truss plate where dependability and customer service is our number one priority.

Contact: Ms. April Black • 252-482-1152 • 252-482-0399 fax • Send April a messagewww.automaticstamping.com

Products & Services (1): Truss Plate Manufacturer

Please send me information on:




BCMC Build — 200 sq.ft. — Booth #409

BCMC Build embodies the spirit of Building Community, Making Connections. As the second annual charity build held in conjunction with the BCMC Show, BCMC Build will occur September 19 and 20 in Indianapolis. We're excited to announce partners Habitat for Humanity and Eli Lilly and Company who will help us coordinate the Build. We're upping the ante by building not one but two single family houses!Stop by our booth to review highlights from the event, talk to a volunteer, and learn about how you can participate in the BCMC Build. Visit bcmcbuild.com for more information!

Contact: Ms. Jill Zimmerman • 608-274-4849 • 608-274-3329 fax • Send Jill a messagewww.BCMCBuild.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Beadles Lumber Company — 100 sq.ft. — Booth #612

Manufacturers of visually superior SYP MSR lumber,graded and stamped with #1 wane. 2x4 through 2x12. Look for SPIB mill stamp number "205."

Contact: Mr. Joe Castleberry • 229-890-2400 • 229-985-0344 fax • Send Joe a messagewww.beadleslumber.com

Products & Services (2): Lumber MillMSR Lumber Producer

Please send me information on:




Canadian Wood Products Montreal Inc. — 100 sq.ft. — Booth #624

CWP focuses its efforts on certain specialty products in order to offer a service of high quality. Our traders are in touch with forest products suppliers around the world and they can help you find what you need. The following products constitute our specialties: certified lumber, commodities, export, MSR lumber, premium lumber, and tropical wood.

Contact: Ms. Johanne Bolduc • 514-871-2120 • 514-871-9316 fax • Send Johanne a messagewww.canadianwood.ca

Products & Services (2): Lumber Wholesaler/BrokerMSR Lumber Producer

Please send me information on:




Carolina Strapping and Buckles Company — 100 sq.ft. — Booth #524

Carolina Strapping and Buckles Company is the leading U.S. manufacturer of woven, composite and bonded strapping and lashing products used in a wide variety of packaging and load securement applications. Our brand name products: GatorSTRAP, MakoSTRAP, ZippSTRAP and GatorLASH offer savings, safety and convenience compared to traditional steel banding and ratchet straps.

Contact: Mr. Kevin Wassil • 704-349-0000 • 704-349-0010 fax • Send Kevin a messagewww.carolinastrapping.com


Please send me information on:




Charleston Services, Inc. — 100 sq.ft. — Booth # Not Yet Assigned

New Exhibitor 

Charleston Services, Inc. is a global provider of industrial services including auctions, liquidations, appraisals, equipment sourcing and brokerage, tax consulting, and asset redeployment. We are hosting several auctions in the construction industry featuring building components and materials. The 2011 BCA Construction and Design Expo and Auction on September 28th and 29th will be held at the Memorial Coliseum Exposition Center in Fort Wayne, Indiana. This event features a light construction equipment auction on Wednesday, September 28th and a heavy construction equipment auction on Thursday, September 29th. Event details can be found online at www.CharlestonAuctions.com. We would also like to feature an online auction we are hosting for a building systems manufacturer in Anderson, Indiana. View the catalog, register, and bid online by following the links at www.CharlestonAuctions.com. Bidding ends on Thursday, October 6th.

Contact: Ms. Katherine Graham • 260-373-0850 • 260-373-854 fax • Send Katherine a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Clark Industries, Inc. — 200 sq.ft. — Booth #315

SBC Gold Advertiser 

Clark Industries, Inc. manufactures a unique range of production equipment for the building component industry. Our equipment line includes roof & floor truss presses, jack presses, column laminators, conveyors & stackers, etc. We stress quality, reliability, and continued support. Come by our booth to learn how we can help you.

Contact: Mr. Jared Schulz • 417-235-7182 • 417-235-8262 fax • Send Jared a messagewww.clark-ind.com


Please send me information on:




CLP Systems — 100 sq.ft. — Booth #203

New Exhibitor 

CLP Systems is an engineered structural shear wall hold down and uplift restraint system utilizing threaded rod to provide a "continuous load path" from the top plate to the foundation. The CLP System resists roof structure movement and building overturning. CLP is purchased either by the general contractor or the framer. All of our shop drawings are signed and sealed and submitted through the proper channels for approval. CLP Systems has provided innovative structural threaded rod tie-down systems and service solutions to the wood-framed multi-family housing market since 2002. CLP Systems have been installed and passed inspection on over 900 projects in 34 states and Canada.

Contact: Mr. Rich Clark • 205-443-2000 • 205-443-2050 fax • Send Rich a messagewww.clp-systems.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Cold-Formed Steel Council (Sharing space with SBCA) — 0 sq.ft. — Booth #405

SBCA established the Cold-Formed Steel Council (CFSC) to focus on issues that affect manufacturers of steel structural building components. The goal of CFSC is to protect and educate component manufacturers through risk management and training material. Stop by our booth to see all of CFSC's products and services.

Contact: Ms. Jill Zimmerman • 608-274-4849 • 608-274-3329 fax • Send Jill a messagewww.cfsc.sbcindustry.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Component Runner, LLC (Sharing space with MiTek) — 0 sq.ft. — Booth #111

Component Runner, LLC is a Structural Building Components design firm offered exclusively for MiTek Software Suite customers. Component Runner uses a combination of USA Project Managers with 15+ years experience coupled with highly experienced design technicians resulting in quality work at affordable prices. Component Runner services include; complete building modeling using MiTek SAPPHIRE®, MiTek® eFrame, Panel and MiTek engineering software. We offer a Quick Quote service which utilized a blend of detailed analysis and square foot pricing and complete/production ready truss design services using MiTek Software Suite matched with your defaults and preferences. Come visit us inside the MiTek booth.

Contact: Mr. J. Chip Dean • 314-374-7400 • Send Chip a messagewww.ComponentRunner.Com


Please send me information on:




Custom-Arch, LLC — 100 sq.ft. — Booth #427

Arches by Custom-Arch are pre-fabricated to the exact specifications of our homebuilder customers. Our wooden arches are pre-mitered to slip into your panels with ease and nail in place quickly with your standard nail guns. Perfect curvature, strong, durable, and economical...If you want to add value to your wall panels by installing arches, you owe it to yourself to consider Custom-Arch.

Contact: Mr. Gary Robinson • 407-516-2961 • 770-437-0728 fax • Send Gary a messagewww.custom-arch.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Eagle Metal Products — 400 sq.ft. — Booth #413

Trike Sponsor SBC Gold Advertiser 

Serving the component industry for more than 20 years with connector plates, design software, engineering services and manufacturing equipment, Eagle Metal is committed to providing exceptional products and customer service. Manufacturers across the country are discovering the advantages. Visit our booth to learn more. Eagle Metal...Engineered. Tested. True.®

Contact: Mr. Carl Schoening • 972-350-9807 • 972-888-9966 fax • Send Carl a messagewww.eaglemetal.com


Please send me information on:





More info

Eide — 600 sq.ft. — Booth #505

SBC Gold Advertiser 

WizardPDS® is the world's leading automated truss jig system and the first to virtually eliminate ALL setup time and manual jigging at the assembly table. WizardPDS® technology will retrofit with virtually any new or existing truss manufacturing system. Powerful WizardPDS® Gold software offers Truss Projection & Laser Integration features.

Contact: Mr. Thomas P. Hoy • 612-521-9193 x204 • 612-521-9307 fax • Send Tom a messagewww.eideintegratedsystems.com


Please send me information on:




Engineered Wood Council (Sharing space with SBCA) — 0 sq.ft. — Booth #405

SBCA's Engineered Wood Council represents the interests of SBCA members who distribute engineered wood products. Projects include publications and educational programs.

Contact: Mr. Ryan Dexter • 608-274-4849 • 608-274-3329 fax • Send Ryan a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Enventek (Sharing space with Integrated Stealth Technology) — 100 sq.ft. — Booth #528

Enventek manufactures user friendly, safe and inexpensive automation for your company. We build competitive truss automation equipment. Our products include a high speed component saw, linear saw, projector systems, and more. Come see our latest products at www.enventek.com.

Contact: Mr. Chris Walters • 269-815-4150 • 269-471-1330 fax • Send Chris a messagewww.enventek.com

Products & Services (1): Equipment Manufacturer (Truss)

Please send me information on:




FastenMaster — 100 sq.ft. — Booth #205

FastenMaster is a brand of task specific fasteners to make a project Faster, Easier, Stronger. For more information check out the FastenMaster Website at www.FastenMaster.com

Contact: Ms. Tina Del Monte • 800-518-3569 • 413-786-1760 fax • Send Tina a messagewww.fastenmaster.com


Please send me information on:





More info

Finnforest US — 200 sq.ft. — Booth #513

Trike Sponsor SBC Silver Advertiser 

See the Finnforest booth for up to date information on Master Plank LVL beam & headers, Master Chord Truss Chord stock and other laminated engineered wood products from Finland.

Contact: Mr. Robert Loew • 800-622-5850 102 • 810-824-4901 fax • Send Bob a messagewww.finnforestus.com


Please send me information on:




Flash Bridge Co., Inc. — 100 sq.ft. — Booth #424

New Exhibitor 

Flash Bridge Co., Inc. offers the "Original" Truss Spacer. Truss Spacers save time, labor, timber and money when mounting roof trusses. Truss Spacers eliminate problems and are incredibly accurate. Don't build another home without them!

Contact: Mr. Robert A. Johnson • 616-392-9841 • 616-392-3128 fax • Send Bob a messagewww.flashbridgecompany.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Georgia-Pacific Wood Products LLC — 100 sq.ft. — Booth #207

Georgia-Pacific Wood Products operates fourteen Southern Pine lumber mills located in North Carolina, South Carolina, Georgia, Alabama, Mississippi, Arkansas and Texas. Primary production is 2'x4's in 6'-20' lengths, including 7'. Grades include DSS, SS, #1, #2 and #3.

Contact: Mr. Ron Blanchard • 404-652-2819 • 404-487-4114 fax • Send Ron a messagewww.gp.com/build

Products & Services (2): I-Joist ManufacturerLumber Mill

Please send me information on:




GILMAN BUILDING PRODUCTS, LLC — 100 sq.ft. — Booth #518

Gilman Building Products is a quality Southern Yellow Pine manufacturer, servicing the truss industry since 1972. Gilman's annual production of SYP lumber exceeds 600 million board feet per year, with 75% of production going directly to the truss and component manufacturing industry. We invite you to come by our booth and visit us.

Contact: Ms. Angie McCullers • 904-548-1024 • 904-548-1011 fax • Send Angie a message

Products & Services (1): Lumber Mill

Please send me information on:




Hardy Frames (Sharing space with MiTek) — Booth #111

Hardy Frames, Inc. manufactures and markets the revolutionary Hardy Frame® shear wall system and have been the leader in the pre-fabricated shear wall industry for over a decade. The Hardy Frame® system allows building design professionals to economically and safely minimize wall space and maximize wall openings while resisting high wind and earthquake loads.

Contact: Mr. Maged Diab • 805-477-0793 • 805-477-0993 fax • Send Maged a messagewww.hardyframe.com


Please send me information on:




Hundegger USA, L.C. — 100 sq.ft. — Booth #526

Hundegger has manufactured the building industry's leading CNC machinery for over 30 years, and is known for quality and versatility. Products include: the #1 selling Joinery saw; Gantry-style SIPS saws; 4-sided Planers; a component, I-Joist, and Timber Framing saw; and a new linear SIP Saw.

Contact: Mr. Rudy Banuelos • 435-654-3028 • 435-654-3066 fax • Send Rudy a messagewww.hundeggerusa.com


Please send me information on:




Integrated Stealth Technology — 600 sq.ft. — Booth #528

Integrated Stealth Technology will be showing a table with automated jigging. We also have rebuilt machines. Stop by and let us see what we can do for you.

Contact: Ms. Jeri Ashcraft • 517-323-1996 • 517-327-3451 fax • Send Jeri a messagewww.integratedstealth.com


Please send me information on:




ITW BCG Equipment - ITW Building Components Group (Sharing space with ITW Building Components Group) — 0 sq.ft. — Booth #619

Trike Sponsor

Relentless dedication to reliability and innovation by ITW BCG Equipment enables component manufacturers to meet the challenges of today's tight budgets and complex designs. Intelligent Building Systems and Alpine brands are the leading choice for roof, floor and wall manufacturing equipment. Our knowledgeable staff will help you maximize your company's performance and improve your bottom line.

Contact: Mr. Jack Van Cleave • 800-755-6005x4262 • 972-660-3217 fax • Send Jack a messagewww.alpineequip.com


Please send me information on:




ITW BCG Hardware - ITW Building Components Group (Sharing space with ITW Building Components Group) — 0 sq.ft. — Booth #619

Trike Sponsor

Designing structural connections is the lifeblood of what we do. To create more value for you, we offer a complete line of construction hardware and software solutions based on our extensive engineering expertise. Our line of hardware allows us to improve design, simplify and speed overall construction of the entire structure.

Contact: Mr. Michael S. Flood • 616-887-7729 • 616-887-7752 fax • Send Mike a messagewww.itwbcg.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

ITW Building Components Group — 2,500 sq.ft. — Booth #619

Trike Sponsor SBC Gold Advertiser 

ITW Building Components Group is the leading supplier of innovative products and services for the building component industry. Our unrivaled line of software includes design and manufacturing programs that work together to streamline building from start to finish via our Instinct process. We offer engineering services, design & management software, cutting and manufacturing equipment for truss and wall components, floor truss metal webs, metal truss connector plates, cold-formed steel chords/webs/fasteners, and construction hardware.

Contact: Mr. Michael P. Fagan • 954-979-9699 x4067 • 954-977-3178 fax • Send Michael a messagewww.itwbcg.com


Please send me information on:




Keymark Enterprises — 400 sq.ft. — Booth #605

Whole House Design, Single Building Model Technology, Building Information Modeling - Keymark is your one stop shop for integrated floor, wall & roof design software, as well as truss plate supply, engineering services, machinery interfaces, and precut expertise. Visit Keymark's booth at this year's BCMC.

Contact: Mr. Erik C. Ipson • 720-622-2039 • 303-443-9054 fax • Send Erik a messagewww.keymark.com


Please send me information on:





More info

Lakeside Trailer Mfg., Inc. — 100 sq.ft. — Booth #419

5K Run for BCMC Build and Poker Run COMBO Sponsor SBC Gold Advertiser 

Stop by the Lakeside Trailer booth to get all the newest and latest improvements in delivery of components. Unbelievably reduced show prices on all models. We have made over 1,700 truss trailers built since 1987.

Contact: Mr. Lee J. Kinsman • 573-736-2966 • 573-736-5515 fax • Send Lee a messagewww.rollerbed.com


Please send me information on:




MangoTech USA LLC — 200 sq.ft. — Booth #304

"Providing Fresh Automated Solutions Globally" MangoTech continues to provide fresh automated solutions to the building components industry. The M.A.L. AUTOMATED TRUSS JIGGING SYSTEM offers a minimally evasive onsite retrofit. Field proven, over the past 3 years, MangoTech has provided the least expensive automated truss jigging solutions, worldwide. The APOLLO SAW continues to offer fresh automation for wall marking and docking as well as truss cutting. The MANGO WALL EXTRUDER is globally redefining the way walls are built. The unique engineered efficiencies make the MANGO WALL EXTRUDER the most efficient wall panel system on the market.

Contact: Mr. Sean Hubbard • 951-259-4598 • 951-654-3526 fax • Send Sean a messagewww.Mangotech.com


Please send me information on:





More info

Masengill Machinery Company — 100 sq.ft. — Booth #525

SBC Silver Advertiser 

Masengill Machinery is one of the southeast's largest reconditioners of used woodworking machinery. In addition to stock on-hand and the computerized inventory of the UWME (United Woodworking Machinery Exchange), Masengill offers a locating service for reworked machinery to local, regional, national and international customers. We also offer exclusive and open lines in new machinery as well.

Contact: Mr. Wayne Masengill • 423-586-7831 x13 • 423-586-0483 fax • Send Wayne a messagewww.masengills.com


Please send me information on:




Maxibois — 100 sq.ft. — Booth #331

New Exhibitor 

Sales agent for Lamco Forest Products Engineered Wood and MSR distributor. GREENER EWP: Optimizes floor,wall,header,truss,perimeter,roof & beam designs: 1.5E/1.6E/1.8E/2.0E. CUSTOMIZABLE depths 2½"-16", length 5'-32',any 1/16" increments : Match your truss chords with any size: 11 7/8", 14", even 15" depth if needed. ZERO WASTE. Products in MITEK and ALPINE software.

Contact: Mr. Pascale Pouliot • 514-694-9809 • 514-694-5698 fax • Send Pascale a messagewww.maxibois.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Metriguard, Inc. — 100 sq.ft. — Booth #321

The world's leading provider of precision equipment for machine lumber grading (MSR & MEL), veneer testing (LVL), bending & tension testing (Quality Control) and structural panels (OSB & plywood).

Contact: Mr. Todd Kurle • 509-332-7526 • 509-332-0485 fax • Send Todd a messagewww.metriguard.com

Products & Services (1): Equipment Manufacturer (Truss)

Please send me information on:





More info

MiTek — 4,500 sq.ft. — Booth #111

5K Run for BCMC Build Sponsor Convention Center Banner Sponsor Educational Track Handouts Sponsor Educational Track Handouts-Ad on Inside Back Cover Sponsor Poker Run Sponsor Trike Sponsor SBC Gold Advertiser 

At MiTek we continue to invest in your future with bottom-line benefits to your business in any market condition. Your customers benefit when homes they build are designed and estimated correctly from the start - and it all begins with you the Experts and Buildability™. Come see how our family of companies can help bring Buildability to your customers' projects. MiTek, the industry leader in design software and our newest family member - USP Structural Connectors along with Hardy Frames, Aegis Metal Framing and the latest in automated manufacturing equipment have all come together to bring Buildability to your customers.

Contact: Mr. Michael Klein • 314-851-7445 • 314-434-1394 fax • Send Michael a messagewww.mitek-us.com


Please send me information on:




Mold Solutions International — 100 sq.ft. — Booth #327

New Exhibitor 

Mold Solutions International manufactures and distributes products designed to inhibit, prevent and remediate mold growth and mold stains. Our MMR product, a proprietary blend of EPA registered ingredients, is a commercial grade mold stain remover formulated to quickly remove mold stains from lumber used by truss manufacturers.

Contact: Mr. Chris Heller • 708-441-7982 • 815-277-5217 fax • Send Chris a messagewww.fastmoldremoval.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Monet Desauw Inc. — 1,000 sq.ft. — Booth #305

Monet DeSauw Inc. is a company where Engineering and Service collide, bringing you the most sought after cutting and material handling equipment available today. Our linear saw has proven to be the most cost effective saw and our floor web and DeSawyer 2000 fully automated saws are the most reliable.

Contact: Mr. Kevin Troesser • 573-642-4900 • 573-642-3736 fax • Send Kevin a messagewww.desauw.com


Please send me information on:




MSR Lumber Producers Council — 100 sq.ft. — Booth #319

5K Run for BCMC Build Sponsor Poker Run Sponsor

Emphasizing its higher quality, longer spans, and better lifetime performance, we will let you know how you can benefit directly from using MSR lumber at your component manufacturing operation. With more than four dozen regular and associate members, including the largest MSR lumber producers in North America, our association serves an industry that produces 1.8 billion board feet of MSR lumber on average annually. If you are interested in better quality, less waste, less inventory, and better performance, then MSR lumber is a great choice. We welcome your feedback on what you would like next from your MSR producers.

Contact: Ms. Anna L. Stamm • 888-848-5339 • 888-212-5110 fax • Send Anna a messagewww.msrlumber.org

Products & Services (1): Association

Please send me information on:




Nordic Engineered Wood — 100 sq.ft. — Booth #421

Nordic manufactures building products for home and commercial use under strict quality control. Nordic is FSC certified, manages over 2 million acres of forests with output capacities of 140 million linear ft. of I-joist and 50 million board ft. of glulam products. Black spruce is the source for Nordic products. Nordic X-LAM CLT panels are the alternative to steel and concrete construction. Nordic lam decking allows for greater beam spacing, suited for multi-storey projects.

Contact: Ms. Karen Jakubonis • 514-871-8526 x221 • 514-871-9789 fax • Send Karen a messagewww.nordicewp.com


Please send me information on:




Palfinger North America — 800 sq.ft. — Booth #101

Palfinger North America is a world class manufacturer of truck mounted knuckle boom cranes and forklifts. Used in many applications, we offer several models, which can be operated with radio remote control for fast and economical operation. Palfinger also offers the ideal solution for various loading and unloading problems encountered by transport operators. Different models of the Crayler truck mounted forklift are available depending on your specific needs. Palfinger and their distributors can help custom-manufacture a material handling system to meet your toughest challenges! For more information on the Palfinger product lines, please contact us at 800-567-1554.

Contact: Ms. Kristi Kraneyk • 905-374-2975 x248 • 905-374-1203 fax • Send Kristi a messagewww.palfinger-northamerica.com


Please send me information on:




Panel Fastening Systems - ITW Building Components Group (Sharing space with ITW Building Components Group) — Booth #619

Trike Sponsor

ITW Panel Fastening Systems (a division of ITW BCG Equipment) is a supplier of pneumatic and cordless nailing, stapling tools and fasteners for the wood panel industry. We offer Paslode, Duo-Fast and ToolMatic brand tools and fasteners. Our tools are compatible with all U.S. and European automated panel equipment.

Contact: Mr. Pat Ryan • 888-726-3577 • 847-634-1006 fax • Send Pat a messagewww.itwpfs.com


Please send me information on:





More info

PANELS PLUS — 100 sq.ft. — Booth #614

SBC Gold Advertiser 

Panels Plus is your production equipment source for both wood and steel wall panel equipment. Our standard line of equipment builds 7' to 12' high and 16' long wall panels. From the Framer and Sheathing Station to the Combo Table, we can customize most all of our lines to fit your production needs. Our newest equipment addition is the Panels Plus Floor Section Machine. It is available for both wood or steel floor construction. Panels Plus is a customer focused company. Our equipment is designed and built with expansion in mind. As your business grows so can your system. We can help with your building layout and efficient equipment choices. Customer service, installation, and training sets Panels Plus apart from the rest.

Contact: Mr. Tim Kaasa • 507-377-5341 • 507-369-0524 fax • Send Tim a messagewww.panplus.com


Please send me information on:





More info

Pennsylvania Lumbermens Mutual Insurance Company — 100 sq.ft. — Booth #519

SBC Silver Advertiser 

PLM specializes in property and casualty insurance for the lumber, woodworking and building material industries. We offer competitive rates, loss control programs and prompt claims handling. We carry an A.M. Best rating of A (Excellent). For more information call 800-752-1895 or visit our booth to learn more about our services.

Contact: Ms. Charlotte Friend • 267-825-9352 • 267-825-9351 fax • Send Charlotte a messagewww.plmins.com

Products & Services (1): Insurance

Please send me information on:




Princeton Delivery Systems — 200 sq.ft. — Booth #707

Princeton Delivery Systems is the leading U.S. truck mounted forklift manufacturer. Offering PiggyBack® Delivery System models designed for building material applications: The "4-Way", specifically designed to carry long loads, like engineered floor joists, through narrow openings. PB80 will handle prefabricated wall panels or other heavy loads. PB50 - 5,000 pound capacity unit is unequaled in rough terrain performance. PB45 with 4,500 pound capacity is ideal for medium loads on many single axle trucks.

Contact: Ms. Tiffany Watkins • 785-229-6312 • 785-242-8573 fax • Send Tiffany a messagewww.piggy-back.com


Please send me information on:




Rayonier Wood Products — 100 sq.ft. — Booth #618

Rayonier Wood Products manufactures high quality Southern Yellow Pine lumber. Rayonier is a quality-driven, service focused company. Our production facilities give us the flexibility to offer customers the highest quality products for use in construction, remodeling and decorative applications. We have been producing top-grade lumber products since 1926.

Contact: Ms. Donna Whitaker • 912-367-1572 • 912-367-1500 fax • Send Donna a messagewww.rayonier.com

Products & Services (1): Lumber Mill

Please send me information on:




Razer - Vekta Automation — 100 sq.ft. — Booth #531

Vekta Automation manufactures the Razer linear saw and other automated material handling equipment. Our product line now includes a packfeeding system that is capable of stacking timber up to four boards high and is fast enough to keep up with any linear saw on the market. We also offer a more cost effective version of the Razer to cater for small to medium size plants. Stop by our booth to learn more about how Vekta Automation is helping plants of all sizes implement more cost effective automated solutions in today's market.

Contact: Mr. Edward Serrano • 618-6460-2748 • 618-6311-7344 fax • Send Ed a messagewww.vekta.com.au

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




RC Packaging Systems, Inc. — 100 sq.ft. — Booth #620

New Exhibitor 

RC Packaging Systems is an American manufacturer of polyester cord strapping and buckles for over 35 years. Our product lines include: woven and non woven light duty cord, heavy duty and extra heavy duty cord and polypropylene coated composite cord strapping. We also manufacture our phosphate coated and galvanized buckles.

Contact: Mr. Steve Riley • 248-684-6363 • 248-685-3521 fax • Send Steve a messagewww.rcstrap.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Richmond International Forest Products, LLC — 100 sq.ft. — Booth #325

New Exhibitor 

After decades of EWP's proven performance, we're now expanding into this market. Our traditional expertise in supply chain management will ensure inventory and inbound materials that will meet your demands quickly. And the people behind the EWP Division have been in the business for over 20 years. We have experience in all aspects of delivering quality products, including: manufacturing, engineering, distribution and retail operations. We are proud to offer Ultralam™ LVL as our first product line. This high-strength LVL is manufactured with the most advanced LVL technologies, in an environmentally conscious process that virtually produces no waste. The manufacturing and quality assurance program is monitored by PFS Corporation. Ultralam LVL is produced according to ASTM standards and has been issued an ICC-ESR. We have also partnered with c4ci to provide supporting software that utlizes the latest in design advancements.

Contact: Mr. Chad Carnes • 770-361-1931 • 804-270-4547 fax • Send Chad a messagewww.rifp.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Robbins Manufacturing Company — 100 sq.ft. — Booth #705

Robbins Lumber offers distribution centers throughout the midwest specializing in MSR Pine and MSR spruce lumber. We have office locations in Florida, Michigan and Chicago, IL. Stop by our booth and let us show you our commitment to customer satisfaction.

Contact: Mr. Greg Hellman • 813-971-3030 x264 • 813-971-1329 fax • Send Greg a messagewww.robbinslumber.com


Please send me information on:




Sauter-Timber LLC — 100 sq.ft. — Booth #426

New Exhibitor 

Sauter Timber is North Americas first Joinery Center for heavy timber components . We supply the building industry with pre-cut heavy timber components to match with other components, as well as complete timber frame and hybrid homes.

Contact: Mr. Reinhard Sauter • 865-354-6363 • 530-420-3515 fax • Send Reinhard a messagewww.Sauter-Timber.com

Products & Services (1): Heavy Timber Truss Manufacturer

Please send me information on:




SBC Research Institute (Sharing space with SBCA) — 0 sq.ft. — Booth #405

The SBC Research Institute (SBCRI) offers an extensive list of testing options under a variety of application, attachment and loading conditions, all of which will lead to more accurate and efficient design and improved installation/use of products. SBCRI has ISO/IEC 17025 ACLASS accreditation.

Contact: Ms. Peggy Meskan • 608-274-4849 • 608-274-3329 fax • Send Peggy a messagewww.sbcri.info


Please send me information on:




Senco Brands, Inc. — 100 sq.ft. — Booth #712

Contact: Ms. Robin Brinck • 513-388-3908 • 330-645-6070 fax • Send Robin a messagewww.senco.com

Products & Services (2): Fastener SupplierTool Sales & Service

Please send me information on:




Shark Products — 100 sq.ft. — Booth #430

New Exhibitor 

Shark Products designs and manufactures the best and safest fasteners in the construction industry! While remaining innovative and cost effective, we are proud to say that our products are made in the U.S.A., using only certified AMERICAN STEEL. We currently offer ply-clips and hurricane ties, look for hangers coming soon.

Contact: Mr. Greg Lindeman • 877-876-4423 • 330-794-2270 fax • Send Greg a messagewww.tsmsharkproducts.com


Please send me information on:




Sherwood Lumber — 100 sq.ft. — Booth #527

Sherwood Lumber is an independently owned, multifaceted wholesaler of lumber and building materials with offices in New York, Florida, Chicago, Pittsburgh, New England and Portland, Oregon. After nearly 6 decades in business, Sherwood has launched a new marketing campaign, re-branding the company as a leading national player with continued plans to expand across the United States. We are a distributor, risk manager and wholesale broker to lumber dealers, component and truss manufacturers and other industrial applicators. Products range in framing lumber of SYP, HF, DF and SPF to commodity and specialty panels in both soft and hardwoods. Sherwood can guarantee forward pricing for up to 12 months and typically maintains inventories of 60,000,000 board feet. "Lumber Numbers" is a company owned and published market analysis that is distributed weekly to many of our clients. Feel free to request a complimentary copy. We invite you to visit our new brand and view the soon-to-launch website at www.sherwoodlumber.com.

Contact: Mr. David Gaudreau • 312-466-4500 • 312-466-4800 fax • Send David a messagewww.sherwoodlumber.com


Please send me information on:





More info

Simpson Strong-Tie — 300 sq.ft. — Booth #613

5K Run for BCMC Build Sponsor BCMC Bowl Sponsor Poker Run Sponsor SBC Gold Advertiser 

Simpson Strong-Tie Company is the world's largest manufacturer of steel connectors for wood construction. The product line totals nearly 7,000 items, with more than 1,700 different joist hangers alone. Strong-Tie® connectors for solid timber, composite wood products and plated trusses are the most specified of any brand.

Contact: Ms. Frankie Emerson • 925-560-9081 • 925-833-1496 fax • Send Frankie a messagewww.strongtie.com


Please send me information on:




SL-Laser Systems — 100 sq.ft. — Booth #425

Founded in 1988, SL Laser has been a pioneering force in the development of precision single and multiple head laser projection systems for truss, floor deck and wall panel systems. Our patented hardware and state-of-the-art software feature many user-friendly features designed to enhance functionality, while prompting the easy-to-use fundamentals that make our systems the industry benchmark. Seamless integration between TrussPilot™ software and hardware results in reduction of production costs and an increase in accuracy and profitability. Our Laser Systems can be found projecting increased productivity in some of the finest building components manufacturing companies in the world.

Contact: Mr. Jason Galek • 704-561-9990 x103 • 704-561-9994 fax • Send Jason a messagewww.sl-laser.com

Products & Services (1): Laser Equipment

Please send me information on:




Smart-Evolution Corp — 100 sq.ft. — Booth #626

Smart-Evolution Corp. is a company that specializes in radial saw automation and software design for the engineered wood industry. We pride ourselves in bringing to the industry leading edge technology, unparallel service and technical support to satisfy our customer needs.

Contact: Mr. Pierre Martel • 450-347-1121 • 450-347-1121 fax • Send Pierre a messagewww.smart-evolution.com


Please send me information on:




SpaceJoist - ITW Building Components Group (Sharing space with ITW Building Components Group) — 0 sq.ft. — Booth #619

Trike Sponsor

Capture a growing market with SpaceJoist, the industry standard and lightest open-web floor joist available. This truly unique truss system combines the best features of a wood I-joist and an open metal web floor truss to deliver a quality product for maximum efficiency. SpaceJoist is the premier floor system for both commercial and residential applications. See how this INNOVATIVE product can benefit your company.

Contact: Mr. Obert Johnson • Send Obert a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Spotnails — 100 sq.ft. — Booth #521

Spotnails has been one of the leading manufacturers of pneumatically driven fasteners for nearly 70 years. The company manufactures a wide range of industrial fastening products including nails, staples, pins, brads and tools for use in packaging, furniture/woodworking, construction, factory-built housing and many other industries.

Contact: Ms. Candace Mortensen • 847-259-1620 • 847-259-9236 fax • Send Candi a messagewww.spotnails.com

Products & Services (2): Fastener SupplierTool Sales & Service

Please send me information on:




Structural Building Components Association — 400 sq.ft. — Booth #405

Representing component manufacturers, builders, material suppliers and industry professionals, SBCA provides the tools to protect and grow your business. Whether it's educational resources, risk management strategies, building code watch, financial/wage surveys, legislative alerts, in-plant safety and quality control, transportation issues, technical training or marketing plans, SBCA provides tangible benefits to members.

Contact: Ms. Anna L. Stamm • 608-310-6719 • 608-274-3329 fax • Send Anna a messagewww.sbcindustry.com

Products & Services (1): Association

Please send me information on:




Structural Building Components Magazine (Sharing space with SBCA) — 0 sq.ft. — Booth #405

Your Industry...Your Ideas...Your Magazine! Structural Building Components (SBC) Magazine is the component industry's primary resource for leading-edge information about current issues, trends and products that affect the future of framing. SBC staff welcomes your feedback and article ideas at editor@sbcmag.info.

Contact: Mr. Sean Shields • 608-310-6706 • 608-274-3329 fax • Send Sean a messagewww.sbcmag.info

Products & Services (1): Publication

Please send me information on:




T.R. Miller Mill Co., Inc. — 100 sq.ft. — Booth #615

New Exhibitor 

T.R. Miller Mill Company has been a quality lumber producer since 1872. We offer a full line of Southern Yellow Pine products, specializing in machine stress rated (MSR) lumber for the truss industry. Visit our booth and let us help you with your future lumber needs.

Contact: Mr. Robbie Floyd • 251-867-1201 • 251-867-6882 fax • Send Robbie a messagewww.trmillermill.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Taiga Building Products LTD — 200 sq.ft. — Booth #609

Taiga Building Products is the premiere supplier to the building products industry in Canada. The exclusive distributor of Louisiana Pacific's Engineered Wood Products and the Master Licensee and partner of Keymark software, Taiga brings together product expertise, automated engineering software, quality products, and industry leading distribution services.

Contact: Mr. Michael Iallonardo • 604-439-4228 • 604-439-4266 fax • Send Michael a messagewww.taigabuilding.com


Please send me information on:




TODD DRUMMOND CONSULTING LLC — 100 sq.ft. — Booth #533

Lean Manufacturing Consulting Service 9th Year in Consult Business - 45+ Consultations - 20+ Years in Truss Industry
Truss Manufacturing Time Standards (R.E., S.U. & Man-Minutes also known as Houlihan Method) All Departments Addressed During Consult - Manufacturing, Design, Sales & Administration. Written report for present and future needs with all suggestions are based on company goals.

Contact: Mr. Todd Drummond • 603-763-8857 • 815-364-2923 fax • Send Todd a messagewww.todd-drummond.com


Please send me information on:




Truss Plate Council (Sharing space with SBCA) — 0 sq.ft. — Booth #405

SBCA's Truss Plate Council acts as a forum and a resource for the companies that supply truss plates and component design software.

Contact: Mr. Ryan Dexter • 608-274-4849 • 608-274-3329 fax • Send Ryan a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Truss Plate Institute — 100 sq.ft. — Booth #420

Lanyards Sponsor

The Truss Plate Institute (TPI) and its members are connecting the truss industry. Stop by our booth to learn about our nationally recognized 3rd Party Quality Assurance Inspection program, to learn about the ANSI/TPI 1 -2007 standard, and to review and ask questions about other guidelines and technical publications such as BCSI!

Contact: Mr. Michael A. Cassidy, R.A. • 703-683-1010 • 866-501-4012 fax • Send Mike a messagewww.tpinst.org

Products & Services (2): AssociationThird Party Inspection Agency

Please send me information on:




USP Structural Connectors (Sharing space with MiTek) — 100 sq.ft. — Booth #111

USP Structural Connectors serves the residential and commercial building industries throughout the US and Canada. Our product line encompasses over 3000 parts, including a line of connectors for the engineered lumber and plated truss industries and is backed by an in-house engineering staff, technical assistance team and customer service.

Contact: Mr. Marty Ruch • 952-898-8679 x8688 • 952-898-8683 fax • Send Marty a messagewww.uspconnectors.com


Please send me information on:




Virtek (Sharing space with MiTek) — 0 sq.ft. — Booth #111

Virtek is the leading developer of precision laser-based solutions enabling component manufacturers to produce products faster, better and at lower costs. Come and see the new Virtek TrussLine Laser Projection System, with new software that features improved usability, real-time production status and reporting functionality. Virtek's new fully released TrussView data projection and control system provides heads up display while virtually eliminating paperwork thus adding to productivity and quality. The LaserMC, laser marking system, has no ink mess or consumables. It streamlines the production of component materials used in wall panel assembly by measuring, laser marking and cutting in a single step.

Contact: Mr. Gilles Labranche • 519-746-7190 x431 • 519-746-3383 fax • Send Gilles a messagewww.virtek.ca


Please send me information on:




Wall Panel Council (Sharing space with SBCA) — 0 sq.ft. — Booth #405

SBCA's Wall Panel Council provides information and resources for the manufacturers of wood wall panels and their suppliers, and it will assist them as they act to expand the market for their products.

Contact: Ms. Anna Stamm • 608-274-4849 • 608-274-3329 fax • Send Anna a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Wasserman & Associates, Inc. (Sharing space with Monet Desauw, Inc.) — 0 sq.ft. — Booth #305

Tote Bag Inserts Sponsor SBC Bronze Advertiser 

Wasserman & Associates is a representative for new truss, wall panel, stair, door and fingerjointing equipment. We also offer the option of used or reconditioned equipment. As a partner in your equipment selection process, we promote the equipment that best suits your individual requirements, not the equipment that optimizes our commission. We will be displaying a wood fingerjointing line in our booth.

Contact: Mr. Rod Wasserman • 402-438-2161 • 402-438-2524 fax • Send Rod a messagewww.wasserman-associates.com


Please send me information on:




WEIMA America, Inc. — 100 sq.ft. — Booth #520

For over 20 years WEIMA has been providing customized shredding solutions. Size reduction can be used to sell chips, provide boiler fuel or simply save on hauling & labor costs. WEIMA America, Inc. offers both hopper-fed & horizontal machines with features like the V-Rotor System and the Cylinder-Assisted Lift-Up Screen.

Contact: Ms. Audrey Mosley • 803-802-7170 • 803-802-7098 fax • Send Audrey a messagewww.weimaamerica.com


Please send me information on:




Wood Truss Council (Sharing space with SBCA) — 0 sq.ft. — Booth #405

The Wood Truss Council (WTCA) is SBCA's largest council. Representing the wood structural building components industry in the U.S., Canada and internationally, WTCA provides a comprehensive supply of tools and resources for wood truss manufacturers.

Contact: Ms. Anna L. Stamm • 608-274-4849 • 608-274-3329 fax • Send Anna a message

Products & Services (1): Association

Please send me information on:





More info

Wood Truss Systems, Inc. — 200 sq.ft. — Booth #300

SBC Gold Advertiser 

Innovative and objective solutions. Fully independent, we search from a variety of suppliers for new and used equipment that best meets your needs. Count on effective and economical solutions featuring new/used: truss equipment, wall panel equipment, saws- linear,component, radial arm, automated jigging, production consultants, and WoodRunner - automated lumber retrieval system. Respected by our customers and competitors alike for delivery of innovative and objective solutions that consistently places us among the top sales representatives in North America and the world.

Contact: Mr. Jay R. Halteman • 765-751-9990 • 888-751-9914 fax • Send Jay a messagewww.woodtrusssystems.com


Please send me information on:




ENTER YOUR CONTACT INFORMATION

Please enter information so that exhibitors can get back to you.

Please before using this form to submit requests for information. By doing so you will avoid the need to enter your contact information below.

Your name:*
Company name:
Phone:*
Your email address:*
Verify your email address:*

*Required

 
© 2012 Building Components Manufacture   © Menu